Biomaterials Properties - Table of Contents

1. Bond Strength Between Restorative Materials and Tooth Structures
2. Brinell Hardness Number
3. Coefficient of Friction
4. Coefficient of Thermal Expansion (Linear)
5. Color Range of Natural Teeth
6. Colors of Dental Shade Guides
7. Contact Angle
8. Creep of Amalgam
9. Critical Surface Tension
10. Density
11. Dynamic Modulus
12. Elastic Modulus
13. Flow
14. Heat of Fusion
15. Heat of Reaction
16. Impact Strength, IZOD
17. Index of Refraction
18. Knoop Hardness Number
19. Melting Temperatures and Ranges
20. Mohs' Hardness
21. Penetration Coefficient
22. Percent Elongation
23. Permanent Deformation
24. Poisson's Ratio
25. Proportional Limit
26. Shear Strength
27. Shore A Hardness
28. Solubility and Disintegration in Water
29. Specific Heat
30. Strain in Compression
31. Surface Free Energy
32. Surface Tension
33. Tear Energy
34. Tear Strength
35. Thermal Conductivity
36. Thermal Diffusivity
37. Transverse Strength
38. Ultimate Compressive strength
39. Ultimate Tensile Strength
40. Vapor Pressure
41. Vickers Hardness
42. Viscosity
43. Water Sorption
44. Yield Strength
45. Zeta Potential

Introduction to Biomaterials Properties | Biomaterials Properties Table Listing |
References (1-100) | References (101-200) | References (201-244) |

Revised April, 1996
Biomaterials Properties Database, University of Michigan
Contact: Dr William J. O'Brien, Director (FAX: 313-647-5293).
Copyright © Quintessence Publishing, 1996.