 |
 |
.gif)
202. Fujimoto, K., Minato, M., Tadokoro, H., and Ikada, Y.
Platelet deposition onto polymeric surfaces during shunting.
J. Biomed. Mater. Res. 27:335-343, 1993.
203. Shirazi-Adl, A., Dammak, M., an
d Paiement, G. Experimental
determination of friction characteristics at the trabecular
bone/porous-coated metal interface in cementless implants.
J. Biomed. Mater. Res. 27:167-175, 1993.
204. Graiver, D., Durall, R.L
., and Okada, T. Surface morphology
and friction coefficient of various types of Foley catheter.
Biomaterials 14:465-469, 1993.
205. Inoue, T., Saitoh, M. and Nishiyama, M. Thermal properties
of glass ionomer cement
. J. Nihon Univ. Sch. Dent. 35:252-
257, 1993.
206. Fukase, Y., Saitoh, M., Kaketani, M., Ohashi, M., and
Nishiyama, M. Thermal coefficients of paste-paste type pulp
capping cements. Dent. Mater. J. 11:189-196, 1992
.
207. Pamenius, M., and Ohlson, N.G. Determination of thermal
properties of impression materials. Dent. Mater. 8:140-144,
1992.
208. Brantley, W.A., and Kerby, R.E. Thermal diffusivity of
glass io
nomer cement systems. J. Oral Rehabil. 20:61-68,
1993.
209. Scherrer, S.S., and de Rijk, W.G. The fracture resistance
of all-ceramic crowns on supporting structures with
different elastic moduli. Int. J. Prosthodont.
6:462-467,
1993.
210. Haug, S.P., Andres, C.J., Munoz, C.A., and Okamura, M.
Effects of environmental factors on maxillofacial
elastomers: Part III - Physical properties. J. Prosthet.
Dent. 68:644-651, 1992.
211. Eldiwany, M., Powers, J.M., and George, L.A. Mechanical
properties of direct and post-cured composites. Am. J.
Dent. 6:222-224, 1993.
212. Covey, D.A., Tahaney, S.R., and Davenport, J.M. Mechani
cal
properties of heat-treated composite resin restorative
materials. J. Prosthet. Dent. 68:458-461, 1992.
213. Tam, L.E., and Brown, J.W. The tear resistance of various
impression materials with and without modifie
rs. J.
Prosthet. Dent. 63:282-285, 1990.
214. Mahler, D.B., and Adey, J.D. Factors influencing the creep
of dental amalgam. J. Dent. Res. 70:1394-1400, 1991.
215. O'Kane, C., Oliver, R.G., and Blunden,
R.E. Surface
roughness and droplet contact angle measurement of various
orthodontic bonding cements. Br. J. Orthod. 20:297-305,
1993.
216. Cullen, D.R., Mikesell, J.W., and Sandrik, J.L. Stability
of elastome
ric impression materials and voids in gypsum
casts. J. Prosthet. Dent. 66:261-265, 1991.
217. Arshady, R. Microspheres for biomedical applications:
preparation of reactive and labelled microspheres.
Biomaterials 14
:5-15, 1993.
218. Smith, L.T., Powers, J.M., and Ladd, D. Mechanical
properties of new denture resins polymerized by visible
light, heat, and microwave energy. Int. J. Prosthodont.
5:315-320, 1992.
219. Papadogiannis, Y., Lakes, R.S., Petrou-Americanos, A., and
Theothoridou-Pahini, S. Temperature dependence of the
dynamic viscoelastic behavior of chemical-and light-cured
composites. Dent. Mater. 9:118-122, 1993.
220. Lautenschlager, E.P., and Monaghan, P. Titanium and
titanium alloys as dental materials. Int. Dent. J. 43:245-
253, 1993.
221. de Gee, A.J., Feilzer, A.J., and Davidson, C.L. True linear
polymerization sh
rinkage of unfilled resins and composites
determined with a linometer. Dent. Mater. 9:11-14, 1993.
222. Ivoclar Williams, Amherst, N.Y. 14228.
223. Jeneric/Pentron Inc., Wallingford, CT 06492.
224. Li, J., Alatli-Kut, I., and Hermansson, L. High-strength
dental gypsum prepared by cold isostatic pressing.
Biomaterials 14:1186-1187, 1993.
225. J¯rgensen, K.D. Thermal expansion of addition polymerization
(Type II) silicone impression materials. Aust. Dent. J.
27:377-381, 1982.
226. Kawano, F., Dootz, E.R., Koran, A., and Craig, R.G.
Sorption and solubility of 12 soft denture liners. J.
Prosthet. Dent. 72:393-398
, 1994.
227. Tietge, J.D., Dixon, D.L., Breeding, L.C., Leary, J.M., and
Aquilino, S.A. In vitro investigation of the wear of resin
composite materials and cast direct retainers during
removable partial denture place
ment and removal. Int. J.
Prosthodont. 5:145-153, 1992.
228. Onose, H. Properties and characteristics. Section 1:
Physical and mechanical properties. In S. Katsuyama, T.
Ishikawa, and B. Fujii (eds.) Glass Ionome
r Dental Cement-
The Materials and Their Clinical Use. St. Louis: I Shiyaku
EuroAmerica, Inc. Publishers, 1993.
229. Nicholson, J.W., Anstice, H.M., and McLean, J.W. A
preliminary report on the effect of storage in
water on the
properties of commercial light-cured glass-ionomer cements.
Br. Dent. J. 173:98-101, 1992.
230. Kim, K.N., Craig, R.G., and Koran, A. Viscosity of
monophase addition silicones as a function of shear rat
e.
J. Prosthet. Dent. 67:794-798, 1992.
231. Seghi, R.R., Denry, I., and Brajevic, F. Effects of ion
exchange on hardness and fracture toughness of dental
ceramics. Int. J. Prosthodont. 5:309-314, 1992.
232. von Fraunhofer, J.A., and Argyropoulos, D.C. Properties of
periodontal dressings. Dent. Mater. 6:51-55, 1990.
233. Gorodovsky, S., and Zidan, O. Retentive strength,
disintegration, and marginal quality of luti
ng cements. J.
Prosthet. Dent. 68:269-274, 1992.
234. Roeder, L.B., Fulton, R.S., and Powers, J.M. Bond strength
of repaired glass ionomer core materials. Am. J. Dent.
24:15-18, 1991.
235. Eliad
es, G., and Palaghias, G. In vitro characterization of
visible light-cured glass ionomer liners. Dent. Mater.
9:198-203, 1993.
236. DeWald, J.P., Nakajima, H., Schneiderman, E., and Okabe, T.
Wettability of impressi
on materials treated with
disinfectants. Am. J. Dent. 5:103-108, 1992.
237. Chong, Y.H., Soh, G., Setchell, D.J., and Wickens, J.L. The
relationship between contact angles of die stone on
elastomeric impression mate
rials and voids in stone casts.
Dent Mater 6:162-166, 1990.
238. C.M. Sturdevant, T.M. Roberson, H.O. Heyman and J.R.
Sturdevant (eds.) The Art and Science of Operative
Dentistry. St. Louis: Mosby, 1995.
239. Clark, E.B. An analysis of tooth color. J. Am. Dent. Assoc.
18:2093-2103, 1931.
240. Marui, M. Color of the tooth crown. 1. Crown standards for tooth
crown and skin. Kokubyo Gakkai Zasshi 35:412-421, 1968.
241. Sproull, R.C. Color matching in dentistry. Part II. Practical
applications of the organization of color. J. Prosthet. Dent.
29:556-566, 1973.
242. Lemire, P.A. and Burk, B. Color in Dentistry. Hartford, CO: J.M.
Ney Co., 1975.
243. Goodkind, R.J., Keenan, K.M., and Schwabacher, W.B. A comparison of
Chromascan and spectrophotometric color measurements of 100 natural
teeth. J. Prosthet. Dent. 53:105-109, 1985.
244. O'Brien, W.J., Boenke, K.M., Hemmendinger, H., Linger, J.B., and
Wilson, C.I. Color distribution of three regions of extracted human
teeth. Microfilmed Paper no. 2431. (Delivered at) the Annual Meeting of
the International Association for Dental Research, Dental Materials
Group, Seattle, Wa., March 10-13, 1994.
Revised April, 1996
http://www.lib.umich.edu/dentlib/Dental_tables/ref3.html
Introduction to Biomaterials Properties |
Biomaterials Properties Table Listing |
References (1-100) |
References (101-200) |
References (201-244) |
Biomaterials Properties Database, University of Michigan
Contact: Dr William J. O'Brien, Director (FAX: 313-647-5293).
Copyright © Quintessence Publishing, 1996.
