 |
 |
.gif)
102. Powers, J. M., and Caddell, R. M. The macroscopic volume
changes of selected polymers subjected to uniform tensile
deformation. Polymer Engineering and Science, 12(6):432-
436, 1972.
103. Carlstrom, D. Polarization microscopy of dental enamel with
reference to incipient carious lesions. p. 277 In P.
H.Staple, ed., Advances in Oral Biology. London: Academic
Press, 1964.
104. Perloff, A., and Posner, A. S. Preparation of pure
hydroxyapatite crystals. Science, 124(3222):583-584, 1956.
105. Houwink, B. The index of refraction of dental enamel
apatite. Brit. Dent. J., 137(12):472-475, 1974.
106. Neiders, M. E., Weiss, L., and Cudney, T. L. An
electrokinetic characterization of human tooth surfaces.
Arch. Oral Biol., 15(2):135-151, 1970.
107. Leach, S. A. Electrophoresis of synthetic hydroxyapatite.
Arch. Oral Biol., 3(1):48-56, 1960.
108. Reynolds, Jr., C. L. Determination of mercury vapor
pressure over amalgams from weight loss data. J. Biomed.
Mater. Res., 8(6):369-373, 1974.
109. Brady, A. P., Lee, H., and Orlowski, J. A. Thermal
conductivity studies of composite dental restorative
materials. J. Biomed. Mater. Res., 8(6):471-485, 1974.
110. Caputo, A. A., and Reisbick, M. H. Mechanical properties of
a nonprecious type III alloy. J. Dent. Res., 54(2):428,
1975.
111. Mandelkern, L., Quinn, Jr., F. A., and Roberts, D. E.
Thermodynamics of crystallization in high polymers: Gutta
percha. Amer. Chem. Soc. J., 78:926-932,1956.
112. Winkler, S., Ortman, H. R., and Ryczek, M. T. Improving the
retention of complete dentures. J. Prosthet. Dent., 34
(1):11-15, 1975.
113. Dickson, G., and Oglesby, P. L. Elastic constants of dental
amalgam. J. Dent. Res., 46(6):1475, 1967.
114. Price, W. A. Report of laboratory investigations on the
physical properties of root filling materials and the
efficiency of root fillings for blocking infection from
sterile tooth structures. Nat. Dent. Assoc. J., 5(12):1260-
1280, 1918.
115. Dennison, J. B., and Thompson, W. H. Unpublished data.
University of Michigan School of Dentistry, Ann Arbor.
116. Nakayama, W. T., Hall, D. R., Grenoble, D. E., and Katz, J.
L. Elastic properties of dental resin restorative
materials. J. Dent. Res., 53(5):1121-1126, 1974.
117. Benson, J. Elemental carbon as a biomaterial. J. Biomed.
Mat. Res., 5(6):41-47, 1971.
118. Koran, A., Powers, J. M., and Craig, R. G. Apparent
viscosity of materials used for making edentulous
impressions. J. Amer. Dent. Assoc., 95(1):75-79, 1977.
119. Vermilyea, S. G., Powers, J. M., Craig, R. G. Rotational
viscometry of a zinc phosphate and a zinc polyacrylate
cement. J. Dent. Res., 56(7):762-767, 1977.
120. Johnston, W. M., and O'Brien, W. J. Shear strength of
dental porcelain. J. Dent. Res., 59(8):1409-1411, 1980.
121. O'Brien, W. J., Fan, P. L., and Apostolodis, A.
Penetrativity of sealants and glazes. Oper. Dent., 3: 51-56,
1978.
122. Faust, J. B., Grego, G. N., Fan, P. L., and Powers, J. M.
Penetration coefficient, tensile strength and bond strength
of thirteen direct bonding orthodontic cements. Amer. J.
Orthodont., 73(5):512-525, 1978.
123. O'Brien, W. J., Fan, P. L., Loesche, W. J., Walker, M. C.,
and Apostolidis, A. Adsorption of Streptococcus mutans on
chemically treated hydroxyapatite. J. Dent. Res., 57(9-
10):910-914, 1978.
124. Barton, Jr., J. A., Brauer, G. M., Antonucci, J. M., and
Raney, M. J. Reinforced polycarboxylate cements. J. Dent.
Res., 54(2):310-323, 1975.
125. Going, R. E., Loehman, R. E., and Chan, M. S. Mouthguard
materials: their physical and mechanical properties. J.
Amer. Dent. Assoc., 89(1):132-138, 1974.
126. Bever, M. B., (ed). Encyclopedia of Materials Science and
Engineering. New York: Pergamon Press, 1986, p. 1059.
127. Fan, P. L., Edahl, A., Leung, R. L., and Stanford, J. W.
Alternative interpretations of water sorption values of
composite resins. J. Dent. Res., 64(1):78-80, 1985.
128. Riddle, E. H. Monomeric Acrylic Esters. New York,
Reinhold Publishing Corp., 1954, p. 13.
129. Sartomer Company, Sartomer Monomer Product Information
Chart, West Chester, PA 19380
130. Boyer, H. E., and Gall, T. L., eds. Metals Handbook. Desk
Edition. Metals Park, Ohio: American Society for Metals,
1985.
131. Ida, K., Togaya, T., Tsutsumi, S., and Takeuchi, M. Effect
of magnesia investments in the dental casting of pure
titanium or titanium alloys. Dent. Mater. J., 1 (1):8-22,
1982.
132. Strach, E. P., Fan, P. L., and O'Brien, W. J. Penetrativity
and wetting of topical fluoride preparations: an in vitro
study. J. Clin. Prev. Dent., 1(6):11-13, 1979.
133. Fan, P. L., O'Brien, W. J., and Craig, R. G. Wetting
properties of sealants and glazes. Oper. Dent., 4(3):100-
103, 1979.
134. Whitlock, R. P., Tesk, J. A., Widera, G. E. O., Holmes, A.,
and Parry, E. E. Consideration of some factors influencing
compatibility of dental porcelains and alloys. Part I.
Thermo-physical properties. pp. 273-282. In Proc. 4th Int.
Precious Metals Conference, Toronto, June 1980. Willowdale,
Ontario: Pergamon Press Canada, April 1981.
135. Kase, H. R., Tesk, J. A., and Case, E. D. Elastic constants
of two dental porcelains. J. Mater. Sci., 20:524-531, 1985.
136. Kase, H. R., and Tesk, J. A. Elastic constants of
nonprecious alloys at room and elevated temperatures.
Microfilmed Paper No. 791. [Delivered at] the annual
meeting of the International Association for Dental
Research, Dental Materials Group, Dallas, Texas, March 15-
18, 1984.
137. Carter, J. M., Flynn, H. E., Meenaghan, M. A., Natiella, J.
R., Akers, C. K., and Baier, R. E. Organic surface film
contamination of Vitallium implants. J. Biomed. Mater.
Res., 15(6):843-851, 1981.
138. Carter, J. M., Sorensen, S. E., Johnson, R. R., Teitelbaum,
R. L., and Levine, M. S. Punch shear testing of extracted
vital and endodontically treated teeth. J. Biomech., 16
(10):841-848, 1983.
139. Carter, J. M. Unpublished data. State University of New York
at Buffalo, School of Dental Medicine, Buffalo.
140. Doctors, M., and Carter, J. M. Thermal properties of non-
metallic dental restoratives. Microfilmed Paper No. 163.
[Delivered at] the annual meeting of the International
Association for Dental Research, Dental Materials Group,
Chicago, Illinois, March 18-21, 1971.
141. Carter, J. M. Thermal properties of dental restoratives.
Microfilmed Paper No. 564. [Delivered at] the annual
meeting of the International Association for Dental
Research, Dental Materials Group, Las Vegas, Nevada, March
23-26, 1972.
142. Iglesias, A. M., Sorensen, S. E., Carter, J. M., and Wilko,
R. A. Some properties of high-copper amalgam alloys
comparing hand and mechanical trituration. J. Prosthet.
Dent., 52(2):194-198, 1984.
143. Holland, R. I. Jorgensen, R. B., and Ekstrand, J. Strength
and creep of dental amalgam: The effects of deviation from
recommended procedure. J. Prosthet. Dent., 54(2):189-194,
1985.
144. Oilo, G., and Gjerdet, N. R. Dental casting alloys with a
low content of noble metals: Physical properties. Acta.
Odontol. Scand., 41(2):111-116, 1983.
145. Oilo, G., and Espevik, S. Kompresjonsstyrke og deformering
hos dentale sementer. Nor. Tannlaegeforen Tid., 88(11):500-
503, 1978.
146. Seghi, R.R., Daher, T., and Caputo, A. Relative flexural
strength of dental restorative ceramics. Dent. Mater. 6:181-
184, 1990.
147. Craig, R. G., ed. Restorative Dental Materials. 9th ed., St.
Louis:C. V. Mosby, 1993.
148. Powers, J. M., Hostetler, R. W., and Dennison, J. B. Thermal
expansion of composite resins & sealants. J. Dent. Res.,
58(2):584-587, 1979.
149. O'Brien, W.J., Groh, C.L., and Boenke, K.M. A one-
dimensional color order system for dental shade guides.
Dent. Mater., 5:371-374, 1989
150. Finger, W., and Komatsu, M. Elastic and plastic properties
of elastic dental impression materials. Dent. Mater. 1:129-
134, 1985.
151. O'Brien, W.J., Groh, C.L., and Boenke, K.M. A new, small-
color-difference equation for dental shades. J.Dent. Res.
69:1762-1764, 1990.
152. O'Brien, W.J., Groh, C.L., and Boenke, K.M. Unpublished
data. University of Michigan School of Dentistry, Ann
Arbor.
153. Dootz, E.R., Koran, A., and Craig, R.G. Comparison of the
physical properties of 11 soft denture liners. J. Prosthet.
Dent. 67:707-12, 1992.
154. Dootz, E.R., Koran A., and Craig, R.G. Physical properties
of three maxillofacial materials as a function of
accelerated aging. J.Prosthet. Dent. 71:37 9-83, 1994.
155. Craig, R.G., and Sun, Z. Trends in elastomeric impression
materials. Oper. Dent. 19:138-145, 1994.
156. Craig, R.G., Urquiola, N.J., and Liu, C.C. Comparison of
commerical elastomeric impression materials. Oper. Dent.
15:94-104, 1990.
157. Rueggeberg, F.A., and Paschal, S. Proportioning effect on
physical and chemical properties of polysulfide impression
material. J. Prosthet. Dent. 72:406-413, 1994.
158. Willems, G., Lambrechts, P., Braem, M., Celis, J.P., and
Vanherle, G. A classification of dental composites
according to their morphological and mechanical
characteristics. Dent. Mater. 8:310-319, 1992.
159. Forss, H., Seppa, L., and Lappalainen, R. In vitro abrasion
resistance and hardness of glass-ionomer cements. Dent.
Mater. 7:36-39, 1991.
160. White, S.N., and Yu, Z. Physical properties of fixed
prosthodontic, resin composite luting agents. Int. J.
Prosthodont. 6:384-389, 1993.
161. Murchison, D.F., and Moore, B.K. Influence of curing time
and distance on microhardness of eight light-cured liners.
Oper. Dent. 17:135-141, 1992.
162. Natho, S.A., Chmielewski, M.B., and Kirkup, R.E. Effects of
Colgate Platinum Professional Toothwhitening System (TM) on
microhardness of enamel, dentin, and composite resins.
Compend. Contin. Educ. Dent. 15(suppl 17):S627-S630, 1994.
163. Pilo, R., and Cardash, H.S. Post-irradiation polymerization
of different anterior and posterior visible light-activated
resin composites. Dent. Mater. 8:299-304, 1992.
164. Pagniano, R.P., and Johnston, W.M. The effect of unfilled
resin dilution on composite resin hardness and abrasion
resistance. J. Prosthet. Dent. 70:214-218, 1993.
165. Hotta, M., and Hirukawa, H. Abrasion resitacne of
restorative glass-ionomer cements with a light-cured surface
coating. Oper. Dent. 19:42-46, 1994.
166. Miyawaki, H., Taira, M., Toyooka, H., Wakasa, K., and
Yamaki, M. Hardness and fracture toughness of commerical
core composite resins. Dent. Mater. J. 12:62-68, 1993.
167. Collys, K., Slop, D., Cleymaet, R., Coomans, D., and
Michotte, Y. Load dependency and reliability of
microhardness measurements of acid-etched enamel surfaces.
Dent. Mater. 8:332-335, 1992.
168. Asmussen, E., and Uno, S.. Solubility paramerters,
fractional polarities, and bond strengths of some
intermediary resins used in dentin bonding. J.Dent. Res.
72:558-565, 1993.
169. Vassilakos, N., and Fernandes, C.P. Effect of salivary
films on the surface properties of elastomeric impression
materials. Eur. J. Prosthodont. Rest. Dent.2(1):29-33, 1993.
170. Bordenaye, L., Baquey, Ch., Bareille, R., Lefebvre, F.,
Lauroua, C., Guerin, V., Rouais, F., More,N., Verges, Ch.,
and Anderson, J.M. Endothelial cell compatibility testing
of three different Pellethanes. J. Biomed. Mater. Res.
27:1367-1381, 1993.
171. Chung, K. Effects of palladium addition on properties of
dental amalgams. Dent. Mater. 8:190-192, 1992.
172. Boeree, N.R., Dove, J., Copper, J.J., Knowles, J., and
Hastings, G.W. Development of a degradable composite for
orthopaedic use: mechanical evaluation of an
hydroxyapatite-polyhydroxybutyrate composite material.
Biomaterials 14:793- 796, 1993.
173. Cattani-Lorente, M-A., Godin, C., and Meyer, J.M. Early
strengthú of glass ionomer cements. Dent. Mater. 9:57-62,
1993.
174. White, S.N., and Yu, Z. Compressive and diametral tensile
strengths of current adhesive luting agents. J. Prosthet.
Dent. 69:568-572, 1993.
175. Lewis, B.A., Burgess, J.O., and Gray, S.E. Mechanical
properties of dental base materials. Am.J. Dent.5:69-72,
1992.
176. Lekka, M.P., Papagiannoulis, L., Eliades, G.C., and Caputo,
A.A. A compariative in vitro study of visible light-cured
sealants. J. Oral Rehabil. 16:287-299, 1989.
177. Bapna, M.S., and Mueller, H.J. Fracture toughness,
diamterical strength, and fractography of amalgam and of
amalgam to amalgam vonds. Dent. Mater 9:51-56, 1993.
178. Tam, L.E., Pulver, E., McComb, D., and Smith , D.C.
Physical properties of calcium hydroxide and glass-ionomer
base and lining materials. Dent. Mater. 5:145-149, 1989.
179. Tam, L.E., Pulver, E., McComb, D., and Smith, D.C. Physical
properties of proprietary light-cured lining materials.
Oper. Dent. 16:210-217, 1991.
180. Klooster, J., Logan, G.I., and Tjan, A.H.L. Effects of
strain rate on the behavior of elastomeric impression. J.
Prosthet. Dent. 66:292-298, 1991.
181. Cullen, D.R., and Sandrik, J.L. Tensile strength of
elastomeric impression materials, adhesive and cohesive
bonding. J. Prosthet. Dent. 62:142-145, 1989.
182. Hergenrother, R.W., Wabers, H.D., and Cooper, S.L. Effect
of hard segment chemistry and strain on the stability of
polyurethanes: in vivo biostability. Biomaterials, 14:449-
458, 1993.
183. Caycik, S., and Jagger, R.G. The effect of cross-linking
chain length on mechanical properties of a dough-molded
poly(methylmethacrylate) resin. Dent. Mater. 8:153-157,
1992.
184. Lee, S.Y., and Greener, E.H. Effect of excitation energy on
dentine bond strength and composite properties. J. Dent.
22:175-181, 1994.
185. Sano, H., Ciucchi, B., Matthews, W.G., and Pashley, D.H.
Tensile properties of mineralized and demineralized human
and bovine dentin. J. Dent. Res. 73:1205-1211, 1994.
186. Bryant, R.W., and Mahler, D.B. Modulus of elasticity in
bending of composites and amalgams. J. Prosthet. Dent.
56:243-248, 1986.
187. Jamani, K.D., Harrington, E., and Wilson, H.J. Rigidity of
elastomeric impression materials. J. Oral Rehabil. 16:241-
248, 1989.
188. Beatty, M.W., and Pidaparti, R.M.V. Elastic and fracture
properties of dental direct filling materials. Biomaterials
14:999-1002, 1993.
189. O'Brien, W.J. Magnesia ceramic jacket crowns. Dent. Clin.
North Am. 29:719-723, 1985.
190. Swift, E.J., Jr., LeValley, B.D., and Boyer, D.B.
Evaluation of new methods for composite repair. Dent.
Mater. 8:362-365, 1992.
191. Dhummarungrong, S., Moore, B.K., and Avery, D.R. Properties
related to strength and resistance to abrasion of VariGlass
VLC, Fuji II L.C., Ketac-Silver, and Z-100 composite resin.
ASDC J. Dent. Child. 61:17-20, 1994.
192. Moroi, H.H., Okimoto, K., Moroi, R., and Terada, Y. Numeric
approach to the biomechanical analysis of thermal effects in
coated implants. Int. J. Prosthodont. 6:564-572, 1993.
193. Anusavice, K.J., Hojjatie, B., and Dehoff, P.H. Influence
of metal thickness on stress distribution in metal-ceramic
crowns. J. Dent. Res. 65:1173-1178, 1986.
194. Pamenius, M., and Ohlson, N.G. The determination of elastic
constants by dynamic experiments. Dent. Mater. 2:246-250,
1986.
195. Farah, J.W., Craig, R.G., and Meroueh, K.A. Finite element
analysis of three- and four-unit bridges. J. Oral Rehabil.
16:603-611, 1989.
196. Akagi, K., Okamoto, Y., Matsuura, T., and Horibe, T.
Properties of test metal ceramic titanium alloys. J.
Prosthet. Dent. 68:462-467, 1992.
197. Carr, A.B., and Brantley, W.A. New high-palladium casting
alloys: Part 1. Overview and initial studies. Int. J.
Prosthodont., 4:265-275, 1991.
198. Morris, H.F. Properties of cobalt-chromium metal ceramic
alloys after heat treatment. J. Prosthet. Dent. 62:426-433,
1989.
